Steel cage winding machine for making steel cages whatsapp+8613932960232

The steel cage winding machine is an automated equipment used for making steel cages, which usually consists of the following parts:

Host: The host is the core part of the steel cage winding machine, including the motor, reducer, transmission shaft, rollers, and other components. The host drives the rollers to rotate through a motor, thereby achieving the winding of the steel cage.

Console: The console is the control center of the steel cage winding machine, which usually includes human-machine interface, PLC controller, electrical components, and other parts. The control console inputs the parameters and process requirements of the steel cage through the human-machine interface, and then controls the operation of the host through a PLC controller.

Reinforcement cage mold: Reinforcement cage mold is a mold used to make reinforcement cages, usually made by welding steel plates. The size and shape of the mold can be customized according to needs.

Hydraulic system: Hydraulic system is a system used to control the opening and locking of steel cage molds, which usually includes components such as hydraulic pumps, hydraulic cylinders, solenoid valves, وغیرہ.

The process of using a steel cage winding machine to make steel cages is as follows:

Install the steel cage mold on the host and adjust the position and angle of the mold.

Thread the steel bars through the holes of the mold and lock the mold with a hydraulic system.

Enter the parameters and process requirements of the steel cage in the console, and then start the host.

The host drives the rollers to rotate through a motor, winding the steel bars into a steel cage.

After the winding is completed, use the hydraulic system to open the mold and remove the steel cage.

The steel cage winding machine has the advantages of high production efficiency, good quality, and low cost, and is widely used in construction, bridge, tunnel and other engineering fields