Haihui Reinforcement Cage Winding Machine User Guide # Reinforcement Cage Winding Machine # Reinforcement Cage Rolling Machine # Reinforcement Cage Rolling Machine Price

The following is a general tutorial on using a steel cage winding machine:

Preparation: Place the steel cage winding machine on a stable ground and ensure that there are no obstacles around the machine. Check if the power and control cables of the machine are connected correctly.

Installation of steel bars: Install the steel bars that need to be wound on the steel bar bracket of the machine, and adjust the position and length of the steel bars to ensure that they can be wound smoothly.

Adjust machine parameters: Adjust machine parameters such as winding speed, winding angle, winding length, stb. according to the specifications and shapes of the steel bars that need to be wound.

Start the machine: Press the start button of the machine, and the machine will start automatically winding steel bars. During the winding process, it is necessary to pay attention to the operation of the machine to ensure its normal operation.

Complete winding: After the steel bar winding is completed, the machine will automatically stop. At this point, the wrapped steel cage can be removed and the next step of processing or installation can be carried out.

It should be noted that when using the steel cage winding machine, relevant safety operating procedures must be followed, such as wearing safety gloves and goggles. If you are unsure how to use the machine, it is recommended to read the user manual or consult a professional first.